Problemy z apache i PHP

0

Mam serwer na Debianie 3.1 sarge i miałem na nim apache2, wpadłem na wielce genialny pomysł jak co kilka miesięcy, żeby apdejtnąć apache2, no to jak zawsze bez zastanowienia

apt-get install apache2

wykryło nową wersję, zainstalowało [przy tym wywaliło mody jak zawsze] doinstalowałem mody, odpalam stronę serwera i ... :|

Jak otwieram stronę to zamiast otwierać plik PHP apache wywala okienko dialogowe w przeglądarce "zapisz plik jako" i mogę sobie skrypt co najwyżej na dysku zapisać.

Pierwsze co, konfiguracja.. ale konfiguracja nie tknięta po ostatnim apache2 przez apdejtem. no to pokombinowałem z modami, też wszystko jest OK, mody są zainstalowane, w konfiguracji są pliki CONFIG i LOAD, w modach aktywnych są linki symboliczne i dalej nic, restart apacza i nic. wywaliłem apacza i wszystkie mody przez apt-remove, zainstalowałem na nowo i dokładnie to samo...

Eh, nie wiem co ja sknociłem... A bardzo potrzebuje apache na tym serwie.

Konfiguracja...

Based upon the NCSA server configuration files originally by Rob McCool.

  1. Changed extensively for the Debian package by Daniel Stone [email protected]

  2. and also by Thom May [email protected].

  3. ServerRoot: The top of the directory tree under which the server's

  4. configuration, error, and log files are kept.

  1. NOTE! If you intend to place this on an NFS (or otherwise network)
  2. mounted filesystem then please read the LockFile documentation
  3. (available at URL:http://www.apache.org/docs/mod/core.html#lockfile);
  4. you will save yourself a lot of trouble.

ServerRoot "/etc/apache2"

  1. The LockFile directive sets the path to the lockfile used when Apache
  2. is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
  3. USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
  4. its default value. The main reason for changing it is if the logs
  5. directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
  6. DISK. The PID of the main server process is automatically appended to
  7. the filename.

LockFile /var/lock/apache2/accept.lock

  1. PidFile: The file in which the server should record its process
  2. identification number when it starts.

PidFile /var/run/apache2.pid

Timeout: The number of seconds before receives and sends time out.

Timeout 300

  1. KeepAlive: Whether or not to allow persistent connections (more than
  2. one request per connection). Set to "Off" to deactivate.

KeepAlive On

  1. MaxKeepAliveRequests: The maximum number of requests to allow
  2. during a persistent connection. Set to 0 to allow an unlimited amount.
  3. We recommend you leave this number high, for maximum performance.

MaxKeepAliveRequests 100

  1. KeepAliveTimeout: Number of seconds to wait for the next request from the
  2. same client on the same connection.

KeepAliveTimeout 15

  1. Server-Pool Size Regulation (MPM specific)

  3. prefork MPM

  4. StartServers ......... number of server processes to start

  5. MinSpareServers ...... minimum number of server processes which are kept spare

  6. MaxSpareServers ...... maximum number of server processes which are kept spare

  7. MaxClients ........... maximum number of server processes allowed to start

  8. MaxRequestsPerChild .. maximum number of requests a server process serves
    <IfModule prefork.c>
    StartServers 5
    MinSpareServers 5
    MaxSpareServers 10
    MaxClients 20
    MaxRequestsPerChild 0
    </IfModule>

  9. pthread MPM

  10. StartServers ......... initial number of server processes to start

  11. MaxClients ........... maximum number of server processes allowed to start

  12. MinSpareThreads ...... minimum number of worker threads which are kept spare

  13. MaxSpareThreads ...... maximum number of worker threads which are kept spare

  14. ThreadsPerChild ...... constant number of worker threads in each server process

  15. MaxRequestsPerChild .. maximum number of requests a server process serves
    <IfModule worker.c>
    StartServers 2
    MaxClients 150
    MinSpareThreads 25
    MaxSpareThreads 75
    ThreadsPerChild 25
    MaxRequestsPerChild 0
    </IfModule>

  16. perchild MPM

  17. NumServers ........... constant number of server processes

  18. StartThreads ......... initial number of worker threads in each server process

  19. MinSpareThreads ...... minimum number of worker threads which are kept spare

  20. MaxSpareThreads ...... maximum number of worker threads which are kept spare

  21. MaxThreadsPerChild ... maximum number of worker threads in each server process

  22. MaxRequestsPerChild .. maximum number of connections per server process (then it dies)
    <IfModule perchild.c>
    NumServers 5
    StartThreads 5
    MinSpareThreads 5
    MaxSpareThreads 10
    MaxThreadsPerChild 20
    MaxRequestsPerChild 0
    AcceptMutex fcntl
    </IfModule>

User www-data
Group www-data

  1. The following directives define some format nicknames for use with
  2. a CustomLog directive (see below).
    LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
    LogFormat "%h %l %u %t "%r" %>s %b" common
    LogFormat "%{Referer}i -> %U" referer
    LogFormat "%{User-agent}i" agent

Global error log.

ErrorLog /var/log/apache2/error.log

Include module configuration:

Include /etc/apache2/mods-enabled/.load
Include /etc/apache2/mods-enabled/.conf

Include all the user configurations:

Include /etc/apache2/httpd.conf

Include ports listing

Include /etc/apache2/ports.conf

Include generic snippets of statements

Include /etc/apache2/conf.d/[^.#]*

#Let's have some Icons, shall we?
Alias /icons/ "/usr/share/apache2/icons/"
<Directory "/usr/share/apache2/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

Set up the default error docs.

  1. Customizable error responses come in three flavors:
    1. plain text 2) local redirects 3) external redirects

  1. Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html

Putting this all together, we can Internationalize error responses.

  1. We use Alias to redirect any /error/HTTP_<error>.html.var response to
  2. our collection of by-error message multi-language collections. We use
  3. includes to substitute the appropriate text.

  1. You can modify the messages' appearance without changing any of the
  2. default HTTP_<error>.html.var files by adding the line;

  1. Alias /error/include/ "/your/include/path/"

  1. which allows you to create your own set of files by starting with the
  2. /usr/local/apache2/error/include/ files and
  3. copying them to /your/include/path/, even on a per-VirtualHost basis.

<ifmodule mod_negotiation.c="mod_negotiation.c"> <ifmodule mod_include.c="mod_include.c"> Alias /error/ "/usr/share/apache2/error/" 
<Directory "/usr/share/apache2/error">
    AllowOverride None
    Options IncludesNoExec
    AddOutputFilter Includes html
    AddHandler type-map var
    Order allow,deny
    Allow from all
    LanguagePriority en es de fr
    ForceLanguagePriority Prefer Fallback
</Directory>

ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
ErrorDocument 410 /error/HTTP_GONE.html.var
ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
</ifmodule> </ifmodule>

DirectoryIndex index.html index.cgi index.pl index.php4 index.php index.xhtml

  1. UserDir is now a module
    #UserDir public_html
    #UserDir disabled root

#<Directory /home/*/public_html>

AllowOverride FileInfo AuthConfig Limit

Options Indexes SymLinksIfOwnerMatch IncludesNoExec

#</Directory>

AccessFileName .htaccess

<Files ~ "^.ht">
Order allow,deny
Deny from all
</Files>

UseCanonicalName Off

TypesConfig /etc/mime.types
DefaultType text/plain

HostnameLookups Off

IndexOptions FancyIndexing VersionSort

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

This really should be .jpg.

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

  1. This is from Matty J's patch. Anyone want to make the icons?
    #AddIcon /icons/dirsymlink.jpg ^^SYMDIR^^
    #AddIcon /icons/symlink.jpg ^^SYMLINK^^

DefaultIcon /icons/unknown.gif

ReadmeName README.html
HeaderName HEADER.html

IndexIgnore .??* *~ # HEADER RCS CVS *,t

AddEncoding x-compress Z
AddEncoding x-gzip gz tgz

AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .et
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage it .it
AddLanguage ja .ja
AddLanguage pl .po
AddLanguage ko .ko
AddLanguage pt .pt
AddLanguage no .no
AddLanguage pt-br .pt-br
AddLanguage ltz .ltz
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .se
AddLanguage cz .cz
AddLanguage ru .ru
AddLanguage tw .tw
AddLanguage zh-tw .tw

LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw

AddDefaultCharset ISO-8859-2

AddCharset ISO-8859-1 .iso8859-1 .latin1
AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
AddCharset ISO-8859-3 .iso8859-3 .latin3
AddCharset ISO-8859-4 .iso8859-4 .latin4
AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
AddCharset ISO-2022-JP .iso2022-jp .jis
AddCharset ISO-2022-KR .iso2022-kr .kis
AddCharset ISO-2022-CN .iso2022-cn .cis
AddCharset Big5 .Big5 .big5

For russian, more than one charset is used (depends on client, mostly):

AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru
AddCharset KOI8-ru .koi8-uk .ua
AddCharset ISO-10646-UCS-2 .ucs2
AddCharset ISO-10646-UCS-4 .ucs4
AddCharset UTF-8 .utf8

AddCharset GB2312 .gb2312 .gb
AddCharset utf-7 .utf7
AddCharset utf-8 .utf8
AddCharset big5 .big5 .b5
AddCharset EUC-TW .euc-tw
AddCharset EUC-JP .euc-jp
AddCharset EUC-KR .euc-kr
AddCharset shift_jis .sjis

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

AddType application/x-tar .tgz

To use CGI scripts outside /cgi-bin/:

AddHandler cgi-script .cgi

To use server-parsed HTML files

<FilesMatch ".shtml(..+)?$">
SetOutputFilter INCLUDES
</FilesMatch>

If you wish to use server-parsed imagemap files, use

#AddHandler imap-file map

BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4.0" force-response-1.0
BrowserMatch "Java/1.0" force-response-1.0
BrowserMatch "JDK/1.0" force-response-1.0

  1. The following directive disables redirects on non-GET requests for
  2. a directory that does not include the trailing slash. This fixes a
  3. problem with Microsoft WebFolders which does not appropriately handle
  4. redirects for folders with DAV methods.

BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully

  1. Allow server status reports, with the URL of http://servername/server-status
  2. Change the ".your_domain.com" to match your domain to enable.

#<Location /server-status>
3. SetHandler server-status
4. Order deny,allow
5. Deny from all
6. Allow from .your_domain.com
#</Location>

  1. Allow remote server configuration reports, with the URL of
  2. http://servername/server-info (requires that mod_info.c be loaded).
  3. Change the ".your_domain.com" to match your domain to enable.

#<Location /server-info>
4. SetHandler server-info
5. Order deny,allow
6. Deny from all
7. Allow from .your_domain.com
#</Location>

Include the virtual host configurations:

Include /etc/apache2/sites-enabled/[^.#]*

</delphi>
0

guru nie jestem, ale czy nie powinny gdzieś być linie "loadmodule ..." ?
patrzyłeś czy w logach czegoś nie ma? próbowałeś zmienić loglevel?

0

no, trzeba przyznać, że nie jesteś ...

Include module configuration:

Include /etc/apache2/mods-enabled/.load
Include /etc/apache2/mods-enabled/.conf

0

a masz zainstalowane php? apt-get --purge remove php* a potem apt-get install php4 lub php5

0

Jak wywaliłem z tą opcją, którą podałeś i zainstalowałem na nowo to działa :|
Dzięki ;-) [browar]

1 użytkowników online, w tym zalogowanych: 0, gości: 1